tool holder
英 [tuːl ˈhəʊldə(r)]
美 [tuːl ˈhoʊldər]
刀柄（夹，把）；装刀杆；（操作器内的）工具盒
双语例句
- The experimental results of turning slender workpieces are compared under the same cutting conditions for traditional tool holder, uncontrolled and controlled piezo-actuated tool holders.
并在相同的切削条件下，实验比较传统刀具、未控制的压电致动刀具和控制的压电致动刀具对于車削细长型工件之颤振抑制效果。 - Fault Analysis and Treatment of the CNC Lathe Tool Holder Control System
数控车床刀架控制系统的故障分析与处理 - The development of said tool and casing holder abroad is introduced, lab experiment and onsite application are introduced as well.
介绍了国内外岩屑床破坏工具和可膨胀套管扶正器的研发和室内试验、现场应用情况； - Therefore, the selection focus of tool holder for HSM is balancing and accuracy.
故选择高速加工用之刀柄时应注意其动平衡性及精度。 - If customer purchase few sets of saddles, grounding head, milling head, tool holder can be installed with them respectivelyformore convenience.
购置多付拖板可分别安装磨头、铣头、刀架，便于对刀准确，方便使用。 - This machine is composed of Bed frame, Gear box, Pressure head, Tube rest, Tool holder, Subsidiary tank, Coolant tank, Chip conveyor as major components.
构成品由底座，齿轮箱，压力感受器，管支架，工具夹，储罐支架，冷却剂箱，排屑输送机等构成。 - 16 tool holder must be designed to provide a minimum of 4 of steel thickness on all sides of cavity imprint.
模座必须设计成：在型腔印痕整侧提供最小4的钢材厚度。 - An example would be to apply this control to make sure the tool and holder can pass through a narrow channel of part geometry.
应用该控制进行试验，以确保刀具和刀架能通过零件几何的狭窄通道。 - Research on the Linear Servo Tool Holder System for Noncircular Cutting
非圆截面车削中直线伺服刀架系统的研究 - Mechanism of Tool Holder Tension Adopting Spring and Hydraulic
采用弹簧与液压的刀柄拉紧机构 - Author developed the modularity speed-rasing tool holder, it can realize: the same tool holder can match different machines with different Morse taper tool holder;
作者开发了模块化牵引驱动增速刀柄，适用于同一锥柄的机床可以实现不同的增速比及同一增速比的增速刀柄可以用于不同型号锥柄的机床。 - Error compensation control of repetitive feedback in servo system for tool holder
伺服刀架系统的反复反馈误差补偿控制 - Computer Aided Design and Simulation of the Linear Servo Tool Holder Control System
直线伺服刀架控制系统的计算机辅助设计与仿真 - The achievement stated in this dissertation is important for utilization micro-feeding tool holder and improving the precision of the lathe machine.
上述研究成果对于开发实用性微进给刀架和提高超精密车床的加工精度，具有重要的理论意义和实用价值。 - Design of micro-feeding tool holder used in turning machining
车削用微进给刀架设计 - Presented in this paper is a new advance in cutting tool material, index cutting tool, cutter holder for bidirection fixed position, dry type cutting, hard stale cutting etc.
介绍了刀具材料、可转位刀具、双向定位刀夹、干式切削、硬态切削等切削技术方面的新进展。 - Concise Analysis on the Selection Length of Locating-lock in Machine Tool Holder Design
基于夹具设计中定位销长度的分析 - Machining Precision Mirror Surfaces& Its Micro position Fast Servo Tool Holder
精密镜面的加工及其快速微动伺服刀架的研制 - Extended theory and methodology for analysis of spindle/ tool-holder interface system in machine tools
机床主轴/刀具联结系统的扩张理论与方法 - No matter lack or exceed both will have effect on the work accuracy of tool holder, and then have effect on the process quality of workpiece.
无论欠定位或过定位均会对夹具的定位精度产生影响，从而影响到工件的加工质量。地面控制点（GCPs）的精度、分布和数量是决定提取DEM数据精度的关键； - Using rock bed dismantle tool and expandable casing holder to improve well bore quality
利用岩屑床破坏工具和可膨胀套管扶正器改善井眼质量 - Since the energy which strikes the tool holder inclu des the explosive gas pressure and the kinetic energy of the moving plunger, thus a high initial acceleration of the tool holder is obtained.
由于撞击夹刀块的能量包括爆炸气压和冲块的动能两项，所以夹刀块能获到很大的初始加速度。 - As part of design method of tool holder, practical performance parameters are measured by experiments and the measured data demonstrates the reliability of this method.
并作为刀架设计方法的一部分，通过实验对微进给刀架的实际性能参数进行了测量，同时测量数据验证了方法的可靠性。 - Design of a Linear Servo Tool Holder System with High-Frequency Response Long Displacement and Micro-Feed
高频大位移微进给直线伺服刀架的设计 - Research on Cam Turning Tool Holder Driven by Linear Motor
直线电机驱动的凸轮车削伺服刀架系统研究 - This article analyses in the design of machine tool holder, when using cylinder-lock as locating part, the locate using of locating-lock and the decide of locating-lock measurement.
分析了机床夹具设计中，使用圆柱销作为定位元件时，定位销的定位作用及定位销临界尺寸的界定； - Due to this special ownership structure, the dividend distribution in public company of our country is different with other countries, which is Chinese characterized. The dividend policy is lack of stability and continuity, which becomes the tool for majority share holder benefiting.
由于我国上市公司具有这种特殊的股权结构，导致我国上市公司股利分配政策也不同于别国，具有中国特色，股利政策严重缺乏稳定性和连续性，它成为控股股东牟取私利的一种手段。 - The research in this paper is advantageous to the deeply study of the mechanical performance in the cutting process. The results are also a reference for the indexable tool and the holder optimization design.
本文的研究有利于对切削过程中的力学特性进行深入研究，可指导可转位刀片与刀杆的优化设计。 - In this paper, we improve it on the basis of its absorption of the original multi-position tool holder advantages, and make it trialing to the vertical turning and milling and quenching composite machining centers. 3.
本文在吸收原有多工位刀夹优点的基础上将其改进，试用于开发的立式乍铣磨及淬火复合加工中心。